STORMSURE Latex Wrist Seal Kit is an all-in-one pack containing carefully selected contents that enables you to make reliable and long-lasting repairs to your drysuit or wetsuit Latex seal.
This kit includes two premium quality Cone or Bottleneck shaped latex seals and flexible clear adhesive glue.
Buy STORMSURE Latex Wrist Seal Kit now and replace your leaking latex seal.
2x - Premium Latex Wrist Seals available in Cone or Bottleneck shape.
90g Stormoprene Clear Adhesive
Disposable gloves and Spatula
Remove the old seal. Cut seal to fit if needed. Apply two layers of Stormoprene glue onto both the drysuit/wetsuit and the area of the seal that will be stuck to the drysuit/wetsuit. Leave the glue to become touch dry between each layer. Position drysuit seal area so that the seal can be stuck on comfortably. Bond, press firmly over the whole bonded area. Bonding is instantaneous, so arrange the positioning very carefully first. Allow curing for 2 hours. Full instructions are included.
Partially used tubes should be kept in the fridge or freezer as it will make the glue go waxy and hard to prevent it from curing inside the tube and ensure there is no air left in the tube before replacing the cap. Warm-up to room temperature before use again to alter its viscosity.